Follow Us On Twitter
 
Products
About Products Applications Technology Corner Ruggedization News/Events
Orion-V5 (2 12-bit DAC)
  • Overview
  • Features & Benefits
  • Details
  • Performance Specifications

Overview

The QuiXilica Orion-V5 VXS is a 6U ANSI/VITA 41 (VXS) compliant high-speed high-speed waveform generator board combining high density FPGA processing with two 12-bit MD653 based, DAC output channels performing at up to 4.0 GSPS (Gigasamples per second) each.
 

By employing three Xilinx Virtex-5 FPGAs, Tekmicro’s Orion-V5 offers unmatched FPGA processing density per channel making it ideal for high channel count signal processing in applications such as RADAR, signals and electronic intelligence (SIGINT / ELINT), and Electronic Warfare (EW). The high bandwidth low latency interconnect provides advanced capability for high-density DSP for waveform generation.
 


QuiXilica Orion-V5
2 x 4.0 GSPS x 12-bit DAC

Each DAC is matched to an FPGA, leaving the third FPGA available for additional channel processing or system control functions. Through a combination of hardware and firmware, Tekmicro has achieved sample-accurate synchronization for multiple channels across an entire chassis. The sample accurate synchronization provides unprecedented accuracy for multi-channel signal generation applications such as threat simulation or beam steering.

The two analog output channels and three Xilinx Virtex-5 FPGAs deliver up to 2,336 DSP slices and 1.3 TeraMAC/s of signal processing.

The Triton-V5 is available for a wide range of operating environments including commercial grade, rugged air, and conduction cooled to support deployed applications such as unmanned airborne, naval and ground vehicles. For more details see Tekmicro’s Rugged Data Sheet.

In addition to Orion-V5, Tekmicro offers a broad range of Xilinx Virtex-5 based streaming I/O and FPGA processing solutions for both analog and digital I/O in a range of form factors. For example, Orion-V5 paired with our 2.2 GSPS dual channel ADC Neptune-V5 board offers developers unique solutions.

Two Channels: Two 12-bit DACs Output at up to 4.0 GSPS Each
First COTS Product to Achieve This Level of Performance.
Sample Accurate Synchronization Across Multiple Boards.
Enables Solutions for New Multi-channel Applications
Phase-matched DAC Outputs
Waveform Generation
Six Digital IO Channels Running at Up to 3.75 Gb/s Using One QSFP and Two SFP+ Front Panel Connections
Flexible Data Movement Across the Front Panel For Use in Standard VME64 Environments
Dual 4x Full Duplex VXS Links and Two Full Duplex VITA 41.6 Ethernet Links
Enhanced VXS Capability
Three Xilinx Virtex-5 FPGAs: LXT, SXT or FXT for Each Location
Flexible FPGA Configuration Options for Each Location
Three GB DDR3 SDRAM Memory, (one GB per FPGA)
Unmatched FPGA Processing Density per Channel
Advanced Temperature & Current Monitoring
Protection From Damage and Usable in Customer Application
Comprehensive Developer’s Kit Provided Including FPGA Interface Cores, QuiXtart FPGA Utilities, Software and Reference Design
Faster Application Development
Convection or Conduction Cooled
Ruggedization Designed in For Demanding Deployed Applications

DAC

Each of the two channels of up to 3.0 GSPS, 12-bit resolution digital to analog conversion use the non-interpolating Euvis MD653D which has a bandwidth of 4 GHz.

The output is AC coupled and may be single-ended or differential (factory build option). The full scale output is -4 dBm (0.4V p-p) into 50 ohms. The DAC may be operated in normal-hold mode, or for extended operation into the 2nd Nyquist band, in Return to Zero (RZ) mode.

Virtex-5 FPGAs

Xilinx Virtex-5 FPGAs are the heart of the Orion-V5. The FPGAs interface between the DAC’s, memory and I/O resources to provide a platform for implementing high performance real time processing. The Orion-V5 is configured with two SX95T FPGAs and one LX110T FPGA. An LX220T, SX240T, or FX100T FPGA can be selected to match resources to the application. All FPGAs are interconnected by wide parallel LVDS busses and also via high speed serial links using the Xilinx Rocket IO MGTs.

Front Panel High Speed Serial IO

Two SFP+ sites and one QSFP site are provided on the front panel which utilize standard fiber optic or 1000BaseT modules providing physical layer support for standard protocols such as Gigabit Ethernet, Serial FPDP (ANSI VITA 17.1 & 17.2), and Fibre Channel.

VXS Backplane High Speed Serial IO

The Orion-V5 can be used as a VITA 41.0 payload card. Up to eight high speed serial links of up to 3.125 Gb/s full duplex data rates are supported via VITA 41.0 MultiGig RT2 P0 connector. Custom or standard communication protocols can be run over these links by providing appropriate firmware in the FPGA.

QuiXstart FPGA Configuration

A number of options are available for configuring the FPGA on the Orion-V5. A JTAG connection is available to allow users to configure the FPGA via standard Xilinx development tools. On board flash is available and can configure the FPGA on power up. Tekmicro’s QuiXstart tool supports flexible configuration of the FPGA through a Gigabit Ethernet link from a remote server after a power up or reset event

Trigger

Trigger input connections are provided on the front panel to allow the hardware to be employed in a variety of radar and EW scenarios. The trigger input is LVDS (LVPECL is a factory build option). The DACs may use independent front panel triggers, or may use a single trigger source for synchronization of the two channels. Multiple Orion-V5 boards may be synchronized using the trigger input.

Clock

The DACs are clocked from separate or combined clock inputs (factory build option). The minimum input clock level is 6.0 dBm into 50 ohms. When using a single, combined clock, the two DACs receive a phase-aligned clock.

Memory

The Orion-V5 has two independent banks of on board double data rate (DDR3) SDRAM for each FPGA, providing a capacity of 512 MB in each bank, 1 GB total per FPGA. The on board memory can be clocked at rates up to 400 MHz, 800 MHz double data rate.
 

System Monitoring


The Orion-V5 board includes facilities to monitor current and temperature at various points on the board. Current monitoring of all main power rails is available. Die temperature monitoring of the three FPGAs and temperature monitoring of three locations on the PCB is also available. This allows a first level of protection when the Orion-V5 is operating in different environmental scenarios. The output from the sensors is available to users’ FPGA firmware applications, to allow the user application to adapt to changes in environmental conditions. The Orion-V5 also uses the system monitoring sensors to implement a system protection mechanism which will, independently of the users’ application, prevent excessive current or temperature from damaging the board.

D/A Converter
Quantity: 2
Sampling Rate: up to 4.0 GSPS each
Resolution: 12-bits
Type: Euvis MD653D, operating in Normal Hold (NH)
Or Return to Zero (RZ) mode
Bandwidth: 4 GHz at full power

Front Panel Analog Signal Input and Output Quantity: 2 DAC SMA Connectors
Type: Single ended. (Differential as factory build option)
DAC Full Scale Output: -4 dBm with 50 Ω double-terminated load

Front Panel Trigger Inputs
Quantity: 1 or 2 via (2 or 4) SMA Connectors
Type: LVDS Termination: LVDS 100 Ω differential terminated.
Mode: Optional Independent Trigger inputs for DAC
Master/Slave: Single common trigger

External Clock
Quantity: 1 or (2) via (2) SMA Connectors
Single ended 50Ω terminated
Input Power Range: 6 dBm (min) to 10 dBm (max)
Operating Modes: Clock Standalone / Master/Slave. Standalone: Use independent clock inputs for DAC inputs.
Master/Slave: Single common clock distributed to DACs

Memory
DDR3 SDRAM (2 banks per FPGA)
Size (STD): 512 MB per bank, 1 GB total per FPGA
Bus Width: 64 bits
Speed: 400 MHz, 800 MHz double data rate

Front Panel High Speed Serial Interface
2x SFP+ Ports: Providing (2) high-speed serial connections. Range of standard protocols, including Gigabit Ethernet and FibreChannel. Firmware supplied at additional cost.

1x QSFP Port: A quadruple SFP connector, of four independent lanes of high-speed serial. The lanes may be bonded together. The port supports a range of standard protocols: Gigabit Ethernet, FibreChannel and 10-Gigabit Ethernet (via 4-lane XAUI). Firmware supplied at additional cost.

JTAG Port
Access to Virtex-5 FPGAs is available via custom JTAG cable assembly that interfaces with the JTAG programming cable.

Size: Standard 6U VMEbus board, single slot; PCB:160mm (6.3”) x 233.5mm (9.2”) Option: VXS P0 connector for backplane I/O

Power:
+5V, +3.3V, ±12V from VME64 backplane. Power consumption is dependent on customer application. Power estimating available on request.

Contact the factory for additional performance details.